Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Brakes/Levers/Pads

The faster you go, the more speed worthy your brakes need to be.

High-performance wheel systems require high-performance braking power. From innovative lightweight calipers to carbon specific brake pads and everything in between, we have a line of brake components to keep your speed in check.

Hope 6mm Copper Seal Washer (Bag of 10)
$1.90
Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
Hope Copper Washer for 5mm or Stainless Line (Bag of 10)
$1.90
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
Hayes Caliper Rebuild Parts
$1.91 - $42.00
- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap
Bontrager Rubber Brake Cable Boot
$1.99
• Designed to keep dust and dirt out of V-Brake cable/housing systems
Hope Brass Compression Olive
$2.39
Brass compression olive for Hope hydraulic disc brakes.
Hope X2 M4 V2 Mono Moto Pad Disc Brake Pads Clip
$2.40
Hope Pad Clip • Fits Tech and Tech Evo M4, X2, and V2 Brakes
Hayes Banjo Bolt
$2.88
Replacement banjo bolt for Hayes hydraulic Brake systems.
Hayes Bleed Kit Adapter
$2.88 - $11.00
Bleed fittings specifically designed for Hayes hydraulic disc brakes.
Hayes Master Cylinder Bleed Plug
$2.99
- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts
Hope Reservoir Cap Screw Brake Lever
$3.00
Replacement reservoir cap screw for Hope brakes.
Formula Rotor Bolt Kits
$3.50 - $51.50
- Replacement Rotor Bolt kits for Formula rotors - 6/pack
Kool-Stop Thinline Brake Pad Hardware Kit
$3.69
- Low profile - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Knurl-lock washer system
Bontrager T-Post Brake Pads
$3.99
A must-have item for all your delicate department store bike repairs.
Shimano 105 5800 Brake Cable Barrel Adjusting Unit
$4.00
- Replacement barrel adjuster for 105 5800 brakes
Alligator CA-351 Pads
$4.42
- 40mm long brake blocks with hardware to fit basic caliper brakes
Alligator VB-600 Cartridge Pads & Inserts
$4.58
- 72mm long forged aluminum holder with hardware to fit most linear brakes - Replacement inserts include retention pins, fit most 72mm aluminum holders
Bontrager Canti Smooth Brake Pads
$4.99
- No metal compound in these pads - They won't be abrasive on your rims - Squeal-free compound
SRAM Master Cylinder/Lever Parts
$5.00
- Parts listed are for servicing and overhauling a single master cylinder/lever assembly
Alligator RD-320 Pads
$5.88
- 50mm long molded brake blocks with hardware to fit most road calipers
Avid Avid Replacement Barrel Adjuster
$5.95
- Replacement barrel adjuster for FR5 and SD7 levers - Includes one pair
Odyssey A Brake Shoes
$5.99
- Pad Attachment Style: Threaded Post - Rim Compatibility: Standard - Intended Brake Type: U-Brake - Pad Type: One Piece
Wheels Manufacturing Inc. Torx Rotor Bolt
$6.58
- Stainless steel torx t-25 Bolt for disc brake rotors - Set of six
Magura Disc Brake Transport Clip
$6.83
- Plastic clip prevents pistons from pressing in while wheel is off of the bike - Fits: Marta, Louise, Clara, Julie
Alligator VB-610 Pads
$6.84
- 72mm long molded brake blocks with hardware to fit most linear brakes
Kool-Stop Campi C89 Series Brake Pad Inserts
$6.95
Kool-Stop's C89 Series insert pad was designed to fit in Campagnolo 8 and 9 speed group systems. Also fits Shimano Dura Ace BR-7400 and BR-7403. Features: Patented Plow Tip Water Grooves Dove Tail fit Rim Friendly Compounds Black - Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. Salmon - Kool-Stop's most famous Salmon compound is also one of our most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. Dual - A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop!
Kool-Stop Dura-Type Brake Pad Inserts
$6.95 - $11.25
The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw. Compounds: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! Features: - Patented Plow Tip - Water Grooves - Rim Friendly Compounds - Fits 55mm length holders
Kool-Stop V Type Brake Pad Inserts
$6.95 - $9.99
Replacement inserts for Shimano cartridge v-brake pads - Black: standard compound designed for dry condition riding - Red: semi-aggressive compound for good performance - Salmon: aggressive compound for extreme weather conditions - Green: designed for ceramic coated rims - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping
Avid Disc Bracket Mounting Bolts (Stainless)
$7.00
Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.
Shimano M70CT4 V-Brake Pads for Machined Sidewall Rims
$7.00
Shimano Replacement pads for Mountain brake shoes - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70CT4: Only for sidewall-machined rims; performs especially well in wet conditions and may pass DIN standard; tends to be low noise, low rim wear and fade - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard
Alligator VB-703 Pads
$7.02
- 72mm long molded brake blocks with smooth post for common cantilever brakes
Page 1 of 16 Next page