Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Car Racks

Take your bike new places.

Bike racks for your rooftop, hitch, trunk, truck bed or spare tire. We'll even install it for you!

Yakima 15mm x 110 Fork Adapter
$69.99
This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any traditional 9mm fork style bike mount. PRODUCT DETAILS - 15mm x 110mm - Axle is not included - Built in safety tabs - Durable black powder coat finish TECHNICAL SPECS - Weight: 0.70 lbs - Dimensions: L 4.50” x W 1.25” x H 4.00”
Yakima Chain Straps
$11.99
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
Yakima TubeTop
$49.99
Yakima's TubeTop solves the dilemma of how to carry bikes that have frames with non-traditional top tubes, such as certain suspension bikes, women's frames, children's bikes and more. The fully adjustable TubeTop is attached to the bike to act as a frame top tube so the bike will mount on all Yakima rear racks. Plus, the TubeTop's large molded collars are gentle on stems and seatposts.
Saris Bones 2-Bike
$159.99
The arch is arguably the most important engineering feat in human history. One look at Saris’ Bones 2-Bike rack would make any ancient Roman proud. With three incredibly strong, arched leg mounts and two arched arms, you can rest assured that your bike is in solid hands. Six highly adjustable straps, each equipped with soft coated hooks, hold the rack down, while the three legs have grippy rubber feet to provide a sturdy base. Ratcheting anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers.
Saris Bones 3-Bike
$184.99
Saris’ Bones 3-Bike rack unites utilitarian strength and modern style. Crafted of incredibly strong, injection-molded plastic, the four arched leg mounts and two arched arms cradle your bikes on different levels to minimize unwanted handlebar and seat contact. Six highly adjustable straps, each equipped with soft, vinyl-coated hooks, hold the rack down, while the four legs have grippy rubber feet to provide a sturdy base that won't harm your vehicle's finish. Ratcheting, soft-touch, anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers. Plus, it folds fast for easy portability and storage.
Saris Bones Hitch Mount (2-Bike)
$229.99
- Carries 2 bikes (35 pounds/bike). - Preassembled. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-ubcg hitches out of the box. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 15 pounds. - Made in Madison, WI.
Saris Sentinel 2-Bike
$74.99
Hit the road today with Saris’ Sentinel 2-Bike rack—it’s ready to go right out of the box, easy to mount, and securely holds two bikes. The frame adjusts to the contours of your car and folds down flat for simple storage. To protect your car and provide a solid mount, the four hold-down straps have coated hooks, while the legs are foam-padded. Stiff ratcheting straps ensure a firm grasp on your bikes.
Saris Solo
$54.99
Easy to mount and a cinch to store in the back of your car, Saris’ Solo is a low-profile rack for peace-of-mind convenience. Solo’s uni-body frame has no adjustable parts, which makes it a no-brainer to set up. With its soft, rubber, pivoting feet and four hold-down straps, the Solo safely and securely attaches to your car. Two strong buckles and an integrated anti-sway strap keep your bike in place. As an added bonus, the Solo is built with 100% recyclable, non-rusting materials.
Saris Superclamp EX, 4 Bike
$899.99
When adventure calls, you need a hardy bike rack to get you and your collection of bikes there. That’s why Saris built the SuperClamp 4-bike from the ground-up to be the safest, toughest, and lightest 4-bike platform hitch rack on the road. It all comes down to its super compact design, with two bikes carried on a single horizontal bar. Plus, each bike rack undergoes unparalleled testing in the heart of tundra country – meaning, if it survives in Wisconsin, it will thrive wherever your compass leads. When it comes to durability, versatility and carrying capacity, the SuperClamp 4-bike packs a punch in its light, 63 lb package. In fact, the SuperClamp is 40% lighter than similar platform hitch racks, yet is guaranteed to last a lifetime thanks to its tough steel construction. Load it up with mountain bikes, electric bikes, kid’s bikes, road bikes, insert-any-bike-type-here bike, and the SuperClamp will carry them safely to their destination. No matter where your bike wants to go, the SuperClamp 4-bike is up for the challenge. - Rock-solid dual hooks provide unmatched security, and never touches the bike’s frame. - Brawny, yet lightweight – designed to carry two bikes on a single bar for a footprint that is both compact and able to carry up to 4 bikes of any type (190 lb total). - Load ‘em up! Crafted to haul a wide variety and combination of bikes. - Tilting feature allows access to rear of vehicle, even when fully loaded (your dog will thank you), and folds up when not in use. - Functional, eye-pleasing design that looks good on any car and features integrated locks, reflectors and of course - a bottle opener.
Kuat Transfer 2
$329.99
Kuat's Transfer 2 offers all the Kuat quality you'd expect at a price that appeals to privateer racers and weekend riders alike. It fits both 1.25 and 2-inch trailer hitches and its stout steel construction won't leave you hanging, or your precious cargo bouncing around on the road. Bikes mount securely and easily with an adjustable locking arm and wheel tray. Best of all, there's no contact with the frame so your bike will come off the rack looking just as good as when you put it on. The wheel trays hold up to a four-inch-wide tire and the rack holds bikes with wheels anywhere from 20 to 29 inches.
Kuat Transfer Lock Kit
$49.99 - $59.99
Transfer cable lock kit including one locking cable per tray and a matching lock for the hitch pin.
Yakima 42-inch SL Hard Top Track Kit
$589.00
42" HARDTOP TRACK KIT. Kit includes: - SkyLine Towers - Landing Pad #1 - Medium CoreBar (60") - Tracks with capnut hardware Technical Specs - Weight: 21.56 lbs
Yakima 54-inch SL Hard Top Track Kit
$599.00
54" HARDTOP TRACK KIT. Kit includes: - SkyLine Towers - Landing Pad #1 - Medium CoreBar (60") - Tracks with capnut hardware Technical Specs - Weight: 22.00 lbs
Yakima 9-Foot SKS Cable
$39.00
Yakima's 9-foot SKS Cable provides a visible theft deterrent for bikes and gear. It locks your load to the crossbar so you can park and leave your vehicle without worrying about your bikes.
Yakima Aero CrossBar Pads
$39.00
If it floats and fits on crossbars, these Crossbar Pads will help protect it. - Goes great with kayak stackers, heavy-duty straps, and strapthang
Yakima BackSwing
$299.00
Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)
Yakima BaseClip
$63.00
Tailor your towers – these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Yakima BaseClip 190
$63.00
Tailor your towers - these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car's naked roof.
Yakima BaseClip 191
$63.00
Tailor your towers - these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car's naked roof.
Yakima BaseLine Towers
$125.00
No rails? No problem. The versatile BaseLine’s intelligent design and advanced adjust ability help it morph to the shape of your car’s roof for a sleek, secure, load-it-up fit. - Secure, easy-to-use tower specifically designed for cars without roof rails or gutters - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - Tri-axial DropHook clip adjustment easily adjusts to a wide range of roof shapes for safe, secure hold - BarBed has 12° of pitch adjustment to optimize tower position and level bars on rounded roofs - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with our SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with - StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS - Dimensions: L 5.00” x W 6.00” x H 4.00”
Yakima BedHead
$79.00
Yakima's BedHead offers an affordable, no-drill solution for carrying a bike by its fork in the bed of your truck. Durable and corrosion-resistant, the BedHead quickly installs onto the interior lip of your truck bed's rail as shown. A beefy, long-throw (so you don't have to unscrew it to install the bike) 9mm-diameter skewer holds your bike fast. Padding protects your truck’s finish, too.
Yakima BedRock HD
$240.00
Sleek and strong, the BedRock HD’s low profile delivers a 300-lb. on-road capacity and Yakima's exclusive new Off-Road Rating for up to 180 lbs. all without the need to drill into the truck bed. Pair it with the HD Bar length that best fits the bed to carry bikes, skis, cargo boxes or the SkyRise Rooftop Tent all while preserving valuable cooler-carrying capacity underneath (HD Bar sold separately). This powerhouse truck rack provides strength and security, easily-accessible tie-down points, and T-slot attachment capability that makes adding gear easy. Product Details: - Easy to reach low profile height position makes it easy to rack out and reach gear - Comes with four towers - Requires Yakima HD Bar crossbar in 60"/68"/78" lengths (Sold Separately) - Simple, tool-free attachment makes installation, removal and crossbar spread adjustments a breeze - Best-in-class, maximum on-road rating of 300 lbs. - Maximum off-road rating of 180 lbs. - Built to last, with engineered aluminum construction and durable powder-coat finish - Integrated tie-down points on end-caps of HD Bar make securing any load quick and simple - T-slot attachments make adding gear mounts and accessories fast and easy - Designed and tested for all common truck beds - Integrated SKS (Same Key System) locks the rack system to the truck bed - Suggested mounts and accessories: Bike Mounts, Cargo Baskets, SkyRise Tent, Wear Strips, Eye Bolts, BigCatch Fishing Kayak Saddles Product Specs: - Weight: 8.01 lbs - Dimensions: L 5.50in x W 4.25in x H 7.00in - Some assembly required, 30 minute install
Yakima Bigstack
$189.00
Go BigStack to go big! Mount up to 4 boats on your roof, or use that room for other gear for a multi-sport adventure. HullGuard padding keeps your boats safe and universal mounts fit nearly any shape crossbar. - Folds when not in use for better aerodynamics - Tool-free installation Fits Yakima round, square, factory, and aerodynamic bars - Top-of-the-line Hullguard padding keeps your boat protected during transport - SteelCore construction uses a steel tube frame for superior strength - Integrated ramp system makes it painless to load your boat - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs Integrated bottle opener - SKS Locks sold separately - Minimum crossbar spreads of 24 inches\u001D or more
Yakima BlockHead
$39.00
When you've got a tough racking dilemma, what you really need is Yakima's BlockHead. This handy device securely holds your bike by the fork with a rugged, 9mm-diameter skewer. The BlockHead is made of anodized aluminum and bolts to your pickup, RV or practically anywhere (use your imagination for hundreds of other bike-storage possibilities).
Yakima Boa Wheelstrap
$7.70
Rear wheel strap for Boa bike mount. Includes one strap.
Yakima Bolt Toploader Brackets
$59.00
Yakima's Bolt Toploader Brackets are permanently mounted brackets that allow Yakima 1A Raingutter Towers or Q Towers to be used in some situations where your car doesn't have rain gutters (towers sold separately).
Yakima Bow/Stern Tiedowns
$39.00
Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. Theyre also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage
Yakima Bowdown
$239.00
Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. Theyre also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage
Yakima CoreBar EndCaps
$4.40
Pair of EndCaps for Yakima CoreBar.
Yakima Corebar
$165.00 - $185.00
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
Page 1 of 17 Next page